11 Best Bottle Warmers For Babies: A Complete Guide
In This Article
Baby bottle warmers help you warm the formula or milk to a perfect temperature. They save you the hassle of heating the bottle in hot water, where you cannot accurately check the temperature.
In this MomJunction post, we tell you what a baby bottle warmer is, the different types of warmers, and the 11 best bottle warmers that you may consider.
Top Picks
11 Best Bottle Warmers
1. Philips Avent Fast Baby Bottle Warmer
Type: Hot water-based warmer
Features:
- It circulates the water around the inner chamber so that the bottle gets warmed uniformly, without leaving any pockets of cold or hot milk within the bottle.
- It only takes three minutes to warm five ounces (about 150ml) of milk.
- A defrost button lets you defrost milk and other solid foods. You can use it to thaw and heat even frozen breast milk. The entire process takes less than ten minutes.
- It can fit all Philips Avent feeding bottles and toddler cups to heat toddler food as well.
- It supports bottles, toddler cups, and baby food jars of most brands. It can support a bottle with a maximum capacity of 11oz (325ml).
[ Read : Avent Electric Steam Sterilizer Review ]
2. Munchkin High Speed Bottle Warmer
Type: Steam-based warmer
Features:
- You can vary the quantity of water you pour for steam, to control the amount of heat generated by the device.
- It has a small water measurement cup with a lid and markings on the exterior of the device.
- There is a quick warming system, which heats the bottle in less than two minutes.
- An alarm sounds when the bottle is warm enough. The automatic shutdown feature turns off the warmer after use.
- An adapter ring lets you hold the smaller bottle in its place.
- There is an inner basket that lets you remove the bottle out without having to hold the bottle.
[ Read : How To Use Munchkin Miracle Stainless Steel Sippy Cup? ]
3. Kiinde Kozii Bottle Warmer
Type: Hot water-based warmer
Features:
- The manufacturer has designed the warmer to work with all types of materials namely plastic, glass, metal, and even plastic milk storage bags.
- The unit uses a low-temperature warming system, which helps preserve the nutritional value of the milk.
- It circulates warm water within the bottle compartment to let the milk warm evenly.
- The auto shut off features turns the warmer off after the bottle has heated.
4. Munchkin Travel Car Baby Bottle Warmer
Type: Portable warmer
Features:
- This portable baby bottle warmer comes with an adapter that draws power from power outlets everywhere, including a car, thus letting you use the warmer on the go.
- The flexible heating band goes over the bottle and warms it evenly. The band fits most bottles.
- A digital display attached to the band shows the temperature and the time remaining to heat the bottle.
- The display lights up so that you can use the device under dimmed lighting.
- The warmer fits baby bottles and car cup holders of most cars.
5. The First Years 4-in-1 Remote Control Bottle Warmer
Type: Hot water-based warmer
Features:
- The device chills the milk and also warms it at the press of a button.
- It ships with two tiny bottles/containers that can be filled with water and placed in the freezer. You then use these containers as ice packs by inserting them into the bottle warmer. The ice packs keep the milk chilled for eight hours.
- Program the warmer to heat the bottle at the desired time. The time in minutes is visible in the backlit digital display.
- Once the time is set, keep the single button remote with you. Press the button whenever you want to start the warming process.
- You can also use the device to keep baby food chilled and later warm it.
6. Tommee Tippee Closer to Nature Portable Baby Bottle Warmer
Type: Portable warmer
Features:
- Easy-to-use and simple design. You get a metal thermos that holds hot water and a plastic container that doubles as a lid for the thermos.
- Place the bottle in the plastic container. Pour hot water from the thermos on it, and leave it for the desired time.
- No electricity required. You can carry the hot water within the thermos and the container anywhere.
- Since you heat the water yourself, you can control the amount of heat preferred.
7. Dr. Brown’s Deluxe Baby Bottle Warmer
Type: Steam-based warmer
Features:
- It has a one-button start function for ease-of-use.
- There is an LCD panel that lets you see the time you set. You can set the time up to eight minutes to heat the bottle. It plays a sound when the bottle is warm and ready-to-serve to the baby.
- You have a memory function, where it can repeat the time of the previous heating cycle.
- There is an adjustable inner basket that lets you fit bottles of various sizes.
- It can warm several bottles with one single filling of the reservoir.
8. The First Years 2-in-1 Simple Serve Bottle Warmer
Type: Steam-based warmer
Features:
- It can warm bottles, sterilize baby’s pacifiers, and even heat toddler food thus making it a multipurpose warmer.
- An inner basket with a handle allows you to place small food jars to warm toddler food.
- You can pre-fill the reservoir with the desired amount of water and then turn on the warmer whenever you need. The auto-off functionality turns the device off once the bottle is warm.
- The compact size of the warmer makes it an easy fit on your kitchen shelf.
- It works with different types and shapes of bottles, including the wide and narrow-mouthed, angled bottles, and even disposable bottles.
9. Babebay Baby Bottle Warmer
Type: Steam and hot water-based warmer
Features:
- It has several functions such as warming, sterilizing, and food heating. You can use these features one after the other.
- The digital display gives an accurate real-time indication of the temperature. A knob lets you precisely change the temperature to anywhere between 98°F and 194°F (37°C and 90°C).
- Place baby’s empty bottles to sterilize them using steam. You can also sterilize other items like pacifiers, bottle parts, and breast milk accessories.
- It evenly warms two bottles at a time. Once done, the device goes into a thermostat mode to maintain the temperature of the bottle.
- You can pour water into the warmer and maintain it at the desired temperature. That way the warmer is ready for heating the bottle any time.
- You can also place toddler cups to heat purees and other foods for the toddler.
[ Read : Beaba baby milk bottle warmer Review ]
10. Tommee Tippee Closer to Nature Electric Baby Bottle Water
Type: Hot water-based warmer
Features:
- It uses a hot water bath to heat the milk evenly without the loss of nutrients. You can also use it to heat baby food.
- It has a control dial for regulating the temperature. An amber light turns on when the water begins to heat. The water heats the bottle in four minutes, and the light switches off. You can then remove the bottle for feeding.
- The bottle can be left within the warmer to keep milk warm until the baby is ready to feed.
- You can fit most bottles of other brands and all Tommee Tippee Closer to Nature baby bottles.
11. Boon Orb Bottle Warmer
Type: Steam-based warmer
Features:
- The warmer has a compact shape with a non-skid base. The mouth of the warmer is big enough to accommodate most feeding bottles.
- You also get a basket with handle, in which to place baby food jars or small sippy cups to heat them before serving the food to the baby.
- You get a measuring tube with markings to pour the precise quantity of water into the chamber.
- The auto-off feature switches off the unit once the milk is warm.
- The unit turns off if it detects no water in the reservoir, which is an excellent safety feature.
Bottle warmers make it easier to heat milk for the baby before feeding. But they need to be maintained properly.
What Is A Bottle Warmer?
A bottle warmer is a device that heats milk within a bottle. The milk is heated to the right temperature for the baby to drink, without the risk of burning or scalding. Most bottle warmers use heated water to heat the milk bottle. You pour water in a compartment within the bottle warmer, place the bottle in it and the bottle warmer heats the water. The heated water, in turn, warms the milk.
[ Read : Babyhug Steam Sterilizer Cum Warmer Reviews ]
Do You Need A Bottle Warmer?
Yes. If your baby is primarily bottle fed, and you frequently store breast milk or formula in a refrigerator, then you should buy a bottle warmer. The following are the primary benefits of using a bottle warmer:
- Heating to the right temperature: You cannot tell to what temperature a bottle heats in a microwave oven or under a stream of hot water. Bottle warmers warm the milk with precision.
- Even heating: The bottle warmer lets you be sure that the milk on the top and at the bottom of the bottle is of the same temperature.
- Maintaining the bottle’s temperature: Several bottle warmers let you store the bottle for maintaining the temperature. It keeps the temperature constant until the infant is ready to feed.
- Saves time: It can take only three to five minutes to bring up the temperature of a chilled milk bottle. It saves time when compared to heating the bottle in a microwave oven or hot water.
[ Read : Chicco 2 In 1 Steam Sterilizer Reviews ]
What Are The Different Types Of Bottle Warmers?
Bottle warmers are of three types, based on the method of heating and ease of use:
- Steam-based: The electric bottle warmer steams the water and then uses it to warm the milk or formula in the bottle. Steam-based bottle warmers are the fastest to heat. However, you have to be careful while holding the bottle after you heat it since the exterior of the bottle might be super hot.
If your baby usually holds the bottle while feeding, make sure you let the exterior cool down before handing it to the baby.
- Hot water type: The water within the warmer is heated enough to warm the bottle. Hot water bottle warmers leave the bottle at a safer temperature from the outside. These warmers also hold the bottle at a constant temperature for longer, which is great if your baby doesn’t want to feed immediately.
- Portable warmer: These use conduction to heat the bottle directly via a heating pad. The pad is wrapped around the bottle and heated using electricity. Alternatively, some portable bottle warmers come with a thermos and a heating lid. Fill the thermos with hot water and then use it anywhere to heat the baby’s bottle.
All bottle warmers achieve the same purpose of heating the bottled milk for the baby. Therefore, you may choose the one that works best for you.
[ Read : How To Use Wabi Baby Sterilizer and Dryer? ]
How To Choose A Bottle Warmer?
Consider the below points before selecting a bottle warmer, to get value for money.
- Nature of usage: Do you need a bottle warmer the most when you are traveling or at home? How patient is your baby while the bottle is getting warm? Think about these points to determine which type of bottle warmer works for you.
If you travel a lot with your baby, then it makes sense getting a portable bottle warmer. If your baby doesn’t like to wait for the bottle to heat up, then you can fasten things with the use of a steam-based bottle warmer.
- Fits the bottle: Not all bottles may fit into a warmer. Check if the feeding bottle you use works with your desired bottle warmer. Several bottle makers also make suitable warmers.
- More than just a warmer: If long-term use and versatility are what you are looking for, then pick a bottle warmer with additional features like bottle storing, cooling, and even the feature to heat containers of baby food.
[ Read : Babyhug Bubble Anti-Colic Feeding Bottle Reviews ]
How To Clean Bottle Warmers?
First, refer to the manufacturer’s manual/ instruction guide. It is your best source of information. Most bottle warmers need the below maintenance.
- Wash removable parts separately: Remove the plastic basket, water reservoir, and other plastic components from the main electric unit. These parts are usually washable in a dishwasher. If the manufacturer does not specify dishwasher safety, then it is best to wash them by hand. Wash them with mild soapy water, rinse with clean water, and leave the parts for air drying.
- Wipe clean the main unit: Do not submerge the electric unit in water and do not rinse it with water. Instead, soak a soft cloth or sponge in soapy water and use it to wipe the interior of the unit. Use a soft dry cloth to wipe it clean. Never use abrasive pads, solvents, and cleaning chemicals since they can damage the inner lining.
- Descale periodically: Descaling is to remove any hard water mineral deposits. Some manufacturers recommend descaling once in two to four weeks. Check the manual for a specific frequency. You will need two ounces (60ml) of white vinegar and the same quantity of plain water. Pour the vinegar and water mixture into the central unit and leave it for about 20 minutes. If the mineral scales are thick, then you can leave the vinegar undiluted for about an hour or two. Discard the vinegar and rinse the unit with water three to four times. Wipe clean with a soft cloth.
Read the user’s manual to know the correct way of cleaning your model of baby bottle warmer. Portable-type bottle warmers can be washed by hand while heating pads can be cleaned using a damp sponge. Besides keeping it clean, following a few best practices can help increase the longevity of the bottle warmer.
Tips For Bottle Warmer Usage:
Here are a couple of tips to let you get the most out of the bottle warmer and increase their lifespan:
- Check if the bottle is safe to be placed in a bottle warmer: Not all feeding bottle materials are designed to withstand high temperatures. Some plastic and glass bottles may not withstand the heat of a steam-based bottle warmer.
Alternatively, some may work only with a hot water-based warmer. Check if the baby’s bottle or toddler’s sippy cup is safe for putting into a bottle warmer. Otherwise, it could break or get damaged when inside the warmer and in turn damage the device.
- Some warmers have a cooling down period: A bottle warmer may need some time to cool down before heating the next bottle, to prevent the unit from overheating. Some bottle warmers may not turn on during the cooling down period, but not all may have the safety feature. Make sure to read the instruction manual to know if your unit requires cooling down and for how long.
Using a bottle warmer to heat the milk eliminates the need to guess if the milk is too cold or too hot for the baby. It also saves you the time of manually heating the bottle. Some cleaning and descaling are all it takes to keep the device working in its top-notch condition.
Have you used a bottle warmer? How was your experience? Do tell us in the comment section below.
Community Experiences
Join the conversation and become a part of our vibrant community! Share your stories, experiences, and insights to connect with like-minded individuals.